Last week or so ago a couple of friends in another project in Cognifide has run into a wall while trying to load test their website. the problem was as follows: The website is highly AJAX based – the page merely loads a stub in the initial request but then loads the rest of its data in a dynamic matter therefore a traditional web testing tools are fairly useless. What they tried was to setup a number of Selenium clients to pound the server, but that turned out to be fairly challenging to the machine doing the testing. It was not possible to set up more than 10 clients on a fairly strong machine.

Also there are other limitations like time to wait for the server to timeout and time between clicks, which I am not sure the tool allowed them to adjust. Talking to them I recalled a tool for grabbing website thumbnails long time ago. one way for them would be to to make a batch file with it. The tool would grab the sites’ thumbnail and stress it, but they would still have to setup a number of clients. Also it creates and tears down an instance of IE every time, making it’s not optimal for that task.

So a couple of evenings later (and a few back-s and forth-s during the testing sessions) out comes SoakIE:

Read the rest of this article »

Popularity: 17% [?]

Have you ever (or have your customers) created and edited a page in one language only to realize that their selected locale was wrong? Have you ever wished you could delete a master language branch of a page  after creating its localized counterpart but you could only delete the newly created slave language instead? Have a customer ever requested that they could copy a whole branch and you convert it to another language so that they could then translate in-place?

Well I have… and I’m sure I will. And so did Fredrikj on the our #epicode IRC channel ;).

Basically I had the tool that would convert from one language to another, but Fredrikj requested something that would switch master language of a page from one to another. Since I’ve already had some of the work done, I’ve updated the stored procedure I’ve written some time ago and slapped a nice GUI up on it. Here’s the result:

What the tool allows you to do is perform either language conversion or master branch switching on a selected page and all of its children (if you choose so).

The stored procedure have been updated to work on CMS5 R2 (will no longer work on R1 – but if you need that functionality, comment here or give me a shout and I’ll create a compatible version for you).

A word of caution though – I take no guarantee whatsoever about its operation. Especially, if you wreck your client’s database with it. I did what I could to prevent some of the obvious problems (like switching to a non existing master or converting to an existing one) but I will not be responsible if it won’t work for you. make a database backup and experiment there before you do any changes on the real data. That said – it works for me, so I think it should also work for you.

You can download the archive containing the tool here. unzip it to your EPiServer web application folder keeping the folder structure or the plugin reference will be wrong. Include the *.aspx and the *.cs files in your project and apply the SQL file to your database (The manipulation is performed by a stored procedure located in the file).

Also if you’re performing the change in a load balanced environment, you may need to restart the other servers once you do the changes. I reset the DataFactory cache, but I am not sure it propagates through to other servers.

Popularity: 28% [?]

Once you’ll update the framework to the extended one, you will immediately notice that… nothing has changed. Hmm… did something go wrong?

Well, not really. By default the framework will be run in the “legacy mode”. Thanks to an old article by our own Marek Blotny, I’ve learned how to build Plugin settings which are just perfect for the purpose!

So to configure and enable the new features you need to open your admin UI and in the “Config” click on the “Plugin Manager” item and select our framework plugin as shown in the picture

The available options are:

Read the rest of this article »

Popularity: 49% [?]

Back in the day when we started designing our last project we’ve been presented with a following problem – a big number of templates with slightly different sidebars.

Hmm…

Is sidebar a part of content? No, rather not. We don’t want the editors to have to setup the sidebar for every article they write (and the site has a few dozens of articles created on it every day).

Is sidebar more of a template thing? Well… more like it, but still… we have articles all over the site with different sidebar elements when the articles are in different parts of the site (ok so we could add rules what controls display in which part of the site). But wait! There’s more! The sidebar will be different for every language (region). Now we’re talking a dozen of templates or a rules engine just to make the sidebar different. Customising the template with properties isn’t ideal either as it makes EPiServer UI very cluttered. Additionally we want to change sidebars across many templates so the whole branch/section of the site will be able to share the same sidebar.

To a degree this is an academic discussion as we’ve been through it with the previous version of the site and we already knew that integrating this stuff into templates just won’t work and we will be in a world of pain just changing the templates over and over adding little tweaks and changes while the customer ads promotions and performs ad campaigns. Well, we can do it, of course, but it’s not a work a programmer will enjoy, and we all want to do new and more exciting things, don’t we?

We have an internally developed  module to make something like that, that is fully home-grown by another internal team (we now have 3 “squads” capable or making incredible things with EPiServer and we tend to share a lot of technologies and try to rotate people around to adopt the good habits and experiences) and I was (and still am) VERY impressed by it. The technology uses EPiServer pages for defining every module (which are located somewhere outside the site root branch. and then you can mix and match them either declaratively in the code) or by handpicking them in the UI. It’s really cool, though, during the discussions it turned out that we might have to add big chunks of functionality and might end up with separate branches of module-pages for different languages/regions, but… frankly… about that time an article by Ted Nyberg reminded me about a technology I have read about quite a while ago in an article by Stein-Viggo Grenersen and ooohhhhhh… I got seduced. I really wanted to try if for a long time and Ted’s article made it a snap to try and get convinced, and more important… convince Stu ;) that it’s the right way to explore.

So I started to dig.

Read the rest of this article »

Popularity: 47% [?]

The configuration of the module is a descendant of any EPiServer Virtual Path Provider configuration. This aspect is fairly well described on EPiServer pages.

A sample configuration for the TextImageVirtualPathProvider can look as follows

<configuration>
  <episerver>
    <virtualPath
      <providers>
        <add showInFileManager="false"
             virtualName="Text Images"
             virtualPath="~/TextImages/"
             bypassAccessCheck="false"
             name="TextImages"
             type="Cognifide.ImageVirtualPathProvider.TextImageVirtualPathProvider,Cognifide.ImageVirtualPathProvider"
             physicalPath="C:\temp\TextImages"
             allowedReferers="(localhost)"
             allowNullReferrer="false"
             replacementStrings="$colon$,:,$gt$,>,$dot$,.,$quot$,&quot;,$amp$,&amp;,$star$,*,$eol$,&#10;,"/>
      </providers>
    </virtualPath>
  </episerver>
</configuration>

where:

• physicalPath is where the cached version of images will be stored
• shownInFileManager is “false” as there is nothing to present for the user in the file manager.
• allowedReferrers is the regular expression containing the filter for sites that are allowed to access the path provider and get images. This has been added so that your server does not turn into the internet’s text-image open service :)
• allowNullReferrer should be set to false in production environment but allows for testing by directly creating URL’s without using a page to fill in the referrer.
• replacementStrings – this one actually turned out to be very useful since some characters are invalid and not even reaching the VPP if EPiServer or ASP detects them. so to allow for characters like colon or < or even a dot (which would make it hard to form regular expression if it was explicitly available) or * you need to create an escape token for them. The string is a coma separated list of token,value,token,value,…
• virtualPath is something you need to change if you want your VPP to serve images under a different root level folder. (e.g. if you have a page with that name already)

Additionally for IIS6 (most common scenario) you need to add <location> node to configuration for the VPP to work.

<configuration>
  <location path=“TextImages“>
    <system.web>
      <!– Setup the StaticFileHandler for the wildcard mapping to work in IIS6–>
      <httpHandlers>
        <add path=“*“ verb=“GET,HEAD“ type=“System.Web.StaticFileHandler“ validate=“true“ />
      </httpHandlers>
    </system.web>
    <staticFile expirationTime=“-1.0:0:0“ />
  </location>
</configuration>

Unless you want to change the location of the virtual path provider can be found under, there is nothing you need to change here.

The code is accessible on EPiCode, but you can also download a compiled binary here. All you need to do then is to unzip the archive to the “bin” folder within your site and set the web.config values to your preference.

Popularity: 98% [?]

We’ve not been talking much about it and that’s partially my fault as well (busy with other projects), but Cognifide has a really cool initiative called Cognifide Labs that we intend to grow over time. The plan is to devote up to 10% company time into side projects that help us grow expertise and allow our devs to dwell into interesting technologies, methodologies and languages and develop their skills.

One of the first projects (that I took part in) is CogniScale – an app that allows FlexiScale users to manage their servers. Here’s the story…

Being the agile company taking part in many EPiServer projects we never seem to have enough environments to test our web-apps and software in general in various scenarios. We find ourselves constantly reinstalling and trying to keep our servers in a state that can can at least remotely be called as stable. After all how many deployments and tearing down of various EPiServer, CruiseControl, TeamCity, SQL Server and other "I need to have" apps can a server take before slowing down to a crawl or collapsing all together (that said I bow before our faithful THOTH for taking all the abuse it does). We definitely needed more servers! And we needed them now!

Early this year we’ve started to talk to the guys at XCalibre that came up with a great idea. What if you could have an unlimited amount of servers available for you at any given time? I mean really what if you could have 0 servers one day and the next day have a rich farm of servers for literally no cost, paying only when you power them up and not paying a bit if you take them down.  This turned out to be quite a project for them that turned to materialize as FlexiScale. (you can read more about it here). Looking at all that I’ve mentioned before while eliminating the cost of maintaining the servers locally we decided to give FlexiScale a spin.

Read the rest of this article »

Popularity: 86% [?]